ETU-Link Technology CO ., LTD.

Products List

Contact Us

: +86-755-2328 4603 : Sales@etulinktechnology.com : 4th Floor, C Building, JinBoLong Industrial Park, QingQuan Road, LongHua District, Shenzhen city, GuangDongProvince,China 518109

Products

SFP+ Passive copper cable
10G SFP+ cables

Description: The ETU-Link SFP+ Passive copper cables are compliant with SFF-8431 and provide connectivity between device using SFP+ ports.

40G QSFP+ to 4x SFP+ breakout passive copper cables
40G QSFP+ to SFP+ cables

Description: The ETU-Link hybrid QSFP+ to 4x SFP+ breakout passive copper cables are 40Gbps to 10Gbps cable assemblies. The QSFP+ to 4x SFP+ cables provide 40GbE systems the ability to connect to 10GbE switches or adapter cards.

100G QSFP28  40G QSFP 100G CFP2
100G QSFP28

Description: cost effective I/O solutions for LAN,HPC and SAN.meet,exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability.compliant with SFF-8436 specifications provide connectivity between devices using QSFP ports.

40G QSFP+ to 40G QSFP+ Direct Attach Passive Copper Cables
40G QSFP+ Direct Attach Cables

Description: The ETU-Link SFP+ Passive copper cables are compliant with SFF-8431 and provide connectivity between device using QSFP+ ports.

40G QSFP+ Active Copper Cable
40G QSFP+ Active Copper Cable

Description: The ETU-Link 40G QSFP+ Active Copper Cbale is compliant with SFF-8436 and an assembly of 4 full-duplex lane, where each lane is up to 10Gb/s per lane.

10G SFP+ to SFP+ Active Optical Cables
10G SFP+ AOC

Description: Compliant to SFF-8431 SFP+ Multi‐Source Agreement 10Gb/s SFP+ Active Optical Cable length up to 300meter on OM3 MMF No cleanliness issue in optical connector. Cost-optimized Less than 0.9W(Each end consumption) Gigalight currently offers cable in l

100G CFP4 LR4
100G CFP4 LR4

ETU-Link 100G CFP4 LR4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control four EMLs (Electric-absorption Modulated Lasers) with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm. The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a PIN photo-detector and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and MDIO management interface.

10G X2 CWDM Transceiver
10G X2 CWDM Transceiver

ETU-Link 10Gb/s X2 transceiver module EX2CXX92-3SCD40 is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to X2 MSA. The EX2CXX92-3SCD40 is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and De-mux with clock and data recovery (CDR).This version of ETU-LINK Inc. transceiver line uses an cooled CWDM EML Laser Diode to achieve 40km over standard single mode fiber as 10GBASE-ER of the IEEE 802.3ae.

10G XENPAK CWDM Transceiver
10G XENPAK CWDM Transceiver

ETU-Link 10Gb/s XENPAK transceiver module EXPCXX92-3SCD40 is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to XENPAK MSA. The EXPCXX92-3SCD40 is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and De-mux with clock and data recovery (CDR).This version of ETU-LINK Inc. transceiver line uses an cooled CWDM EML Laser Diode to achieve 40km over standard single mode fiber as 10GBASE-ER of the IEEE 802.3ae.