
Product Model:
EQP294X-80D(I)Data Rate:
40GWavelength:
WDMDistance:
80kmConnector:
LCFiber Type:
SMDDM:
YESBrand:
ETU-LINK
Q1: What is a 40G QSFP Optical Module?
A1: A 40G QSFP (Quad Small Form-factor Pluggable) module is a hot-swappable transceiver that supports 40Gbps data transmission. It uses a 4-channel parallel design and is widely deployed in data centers and high-performance computing networks.
Q2: What are the common types of 40G QSFP modules?
A2: QSFP+ SR4 (850nm multimode, 100m)
QSFP+ LR4 (1310nm single-mode, 10km)
QSFP+ ER4 (1310nm single-mode, 40km)
QSFP+ BiDi (Single-Fiber Bidirectional)
Q3: How do I check if a 40G QSFP module is compatible with my device?
A3: Verify three aspects:
Switch vendor compatibility lists
Matching fiber type (MMF/SMF)
Required transmission distance
Q4: How to resolve overheating in 40G QSFP modules?
A4: Solutions:
Ensure adequate device ventilation
Use modules with heat dissipation fins
Avoid sustained 100% bandwidth utilization
Q5: What precautions should I take when installing 40G QSFP modules?
A5: Key operational guidelines:
Clean fiber connectors before insertion to prevent dust from disrupting optical signal transmission.
Ensure adequate ventilation around devices; reserve thermal headroom for high-heat modules.
Configure port aggregation mode on the switch when using breakout applications.
Q6: What's the difference between SFP, QSFP and QSFP-DD modules?
A6: SFP (1-25G), QSFP (40-100G), and QSFP-DD (400G+) differ in form factor and bandwidth capacity. QSFP-DD doubles QSFP28's density with 8-lane electrical interfaces.
Q7: How does ETU-Link ensure compatibility with major brands?
A7: We maintain a multi-vendor test lab with full protocol support (Ethernet/InfiniBand/Fibre Channel) and 100% compatibility verification before shipment
Q8: What temperature ranges do your modules support?
A8: Commercial grade (0°C to +70°C)
Extended grade (-20°C to +85°C)
Industrial grade (-40°C to +85°C) for harsh environments.
Q9: How does ETU-Link achieve 40G QSFP+ interoperability?
A9: Through:
Multi-vendor switch testing
Firmware customization for legacy equipment
MSA-compliant electrical interfaces
Q10: Do 40G QSFP+ modules support DDM/DOM monitoring?
A10: Standard feature including:
Real-time temperature (±1°C accuracy)
Tx/Rx power (µW/dBm display)
Laser bias current
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories
© Copyright: 2025 ETU-Link Technology CO ., LTD All Rights Reserved.
IPv6 network supported
Friendly Links:
易天官网