• November 27. 2021

In this blog, ETU-Link will introduce what the fiber optic adapter is. And common types of fiber optic adapters.     Fiber optic adapters, also called flanges, are components that connect fiber-to-fiber or fiber-to-device. They are widely used in telecommunication networks, cable television networks, subscriber loop systems, and optical fiber link connections in regional networks. T...

• November 23. 2021

The QSFP-40/100-SRBD is a dual-rate bidirectional (BiDi) optical module. It features 40G and 100G transmission rates and dual-fiber LC interface type. It can easily help customers upgrade from 10G to 40G/100G networks using existing 10G network duplex multimode fiber architecture. In the following, ETU-LINK will introduce the relevant parameters of the QSFP-40/100-SRBD optical module and the ...

• November 19. 2021

In today's Internet era, both enterprise network deployment and data center construction are inseparable from optical transceivers and switches. Optical transceivers are mainly used to convert electrical and optical signals, while switches are used to forward photoelectric signals. Among many optical transceivers, the SFP+ optical transceiver is one of the most widely used optical transceivers. Wh...

• November 11. 2021

When we use the optical module, sometimes improper use will lead to abnormal operation of the optical module, so in this case, how should we solve it? Today, ETU-LINK will tell you an answer. When the optical power of the optical module is too high or too low, how to diagnose the causes and the corresponding solutions.   Taking Huawei switch as an example, when the optical power alarm occurs,...

• November 05. 2021

At present, MPO patch cord is widely used in high-speed and high-density data center wiring, and its quality determines the stability and sustainability of the whole data center network. So what factors should we consider when choosing MPO patch cord? Today ETU-LINK will introduce the Purchasing Guide of MPO patch cord.     1. Choose a patch cord with a small insertio...

• October 26. 2021

一. Introduction to MPO Patch cord The MPO fiber optic patch cord is composed of a hot-swappable MPO connector and a multi-mode/single-mode fiber optic cable. The MPO optical fiber connector includes optical fiber, sheath, coupling components, metal ring, pin, dust cap, etc., and the pin part is divided into two forms: male and female. The male connector has two PIN pins, while the female connector...

• October 23. 2021

This blog ETU-LINK takes everyone to understand the difference between optical fiber, copper cable and twisted pair. First of all, let’s understand the twisted pair. The twisted pair is made up of multiple groups of insulated copper wires intertwined. The internal medium of the twisted-pair cable is also copper wire, and the internal transmission is an electrical signal. According to the principle...

• October 19. 2021

The Fibre Channel switch originated from the Fibre Channel protocol. On the fourth layer of the Fibre Channel protocol, the Fibre Channel-based SCSI protocol for storage, the IP protocol for the network, and the virtual interface (VI) protocol for clusters mapped to the network architecture are established. Fibre Channel switches provide Fibre Channel switching for high-bandwidth and low-latency d...