• June 06. 2023

At present, most 100G optical modules in the market are transmitted using 4 -channels 25Gb/s parallel or WDM,such as 100G SR4, 100G PSM4, 100G LR4, 100G CWDM4 optical modules, etc. In order to reduce costs and improve transmission efficiency, the industry has proposed the 100G single-lambda specification, which refers to the use of PAM4 optical signaling and coding for single-lambda 100G tran...

• May 31. 2023

In this blog, ETU-LINK will introduce the QSFP-100G-ER4 Lite optical module, which uses LWDM multiplexing technology and operates in the wavelength range of 1295, 1300, 1304, and 1309. The optical signal is multiplexed by a WDM wavelength division multiplexer and transmitted on a single-mode fiber through an industry-standard LC connector. At the receiving end, the SOA amplifies the signal before ...

• April 24. 2023

From the perspective of the development trend of data centers, the trend of "cloud" and digitalization of enterprises is irreversible. The ICT industry such as cloud computing, big data and artificial intelligence has an increasingly large demand for data centers. The bandwidth demand of data centers is growing at a rapid rate of 25% to 35% every year, and the bandwidth capacity is also doubling. ...

• April 04. 2023

In 1.25G and 10G optical modules, BiDi single-fiber and dual-fiber optical modules are transmitted by single-mode jumpers. Today, ETU-LINK will introduce a 100G BiDi single-fiber bidirectional optical module transmitted by multi-mode optical fibers. It adopts double LC fiber interface, uses multi-mode fiber for transmission up to 150 meters, working wavelength is 850nm, 950nm, modulation technolog...

• March 28. 2023

As the market has higher and higher requirements for data transmission rates, higher-speed optical modules are also born. At present, in the high-speed optical module market, 100G optical modules are the mainstream products in the optical communication market. Next, ETU-LINK will introduce the 100G QSFP28 SR4 optical module to you. 100G QSFP28 SR4 Optical Module Introduction The 100G QSFP28 SR4 op...

• March 22. 2023

At present, 4G Long-Term Evolution (LTE) base stations mainly use 10G optical modules, while 5G network deployment, especially in front-end transmission, 25G optical modules have become the first choice. As the fifth generation of mobile communication technology, the advent of the 5G era has brought the 25G optical module market to a new peak of development.     The 4G network is ma...

• March 10. 2023

High speed cable DAC is used for the connection of short distance network devices, such as server, switches,storage and so on. It is a low cost measure of network devices connection. So far there are common DAC cables including 10G SFP+ to 10G SFP+ DAC cable, 25G SFP28 to 25G SFP28 DAC cable, 40G QSFP+ to 40G QSFP+ DAC cable, 40G QSFP+ to 4x SFP+ DAC cable, 100G to 100G QSFP28 DAC c...

• February 28. 2023

Many partners do not know much about the packaging types of optical modules, so in this article, ETU-LINK introduces you to what are the common packaging types of optical modules, right? 1. SFP SFP is known as small form-factor Pluggable, which defines the standard to be followed from 1Gb/s to 28Gb/s single channel SFP package, SFP module compresses the size and power consumption of optical module...