Quality is very important for all products, such as optical Transceiver, only maintain the good quality, the products can be got the trust from the customer , is it right ?

To control the quality of the product,we will conduct some testing, including Material testing, Product parameter testing, Distance testing, Switch testing and Aging testing.

1. Material testing
Testing the material, such as TOSA, ROSA and BOSA, it can reduce reject rate.


2. Product parameter testing
Testing the module parameters, like output power, sensitivity, extinction ratio and eye diagram, the excellent parameter make the products working more steady.



3. Distance testing
For different transmission distance, our engineer will test the module by different meters of optical fiber,  the customer no worried about loss pocket.


4. Switch testing
Insert the module on the switch to check the compatibility, we have some brands of switch, such as Cisco, HUAWEI, HP, Mikrotik, VOLKTEK, will buy more brands of switch future.



5. Aging testing
Install the module to the aging board , then working on it about 24 hours.
The purpose of Aging testing:
1.Finding the failure product in advance before shipment
2.Prohibiting the faulty module to leave the factory
3.Decreasing reject rate
4.Guaranteeing the working stability of the products after leaving the factory


As a professional manufacture, we are focus on the steady quality and excellent service.
An excellent team, a group of young and capable partners, an innovative enterprise, can not do without your support!
Hope the customer will get the powerful support between our cooperation!