• October 26. 2021

一. Introduction to MPO Patch cord The MPO fiber optic patch cord is composed of a hot-swappable MPO connector and a multi-mode/single-mode fiber optic cable. The MPO optical fiber connector includes optical fiber, sheath, coupling components, metal ring, pin, dust cap, etc., and the pin part is divided into two forms: male and female. The male connector has two PIN pins, while the female connector...

• October 23. 2021

This blog ETU-LINK takes everyone to understand the difference between optical fiber, copper cable and twisted pair. First of all, let’s understand the twisted pair. The twisted pair is made up of multiple groups of insulated copper wires intertwined. The internal medium of the twisted-pair cable is also copper wire, and the internal transmission is an electrical signal. According to the principle...

• October 21. 2021

In this article, ETU-Link will explain to you what causes the high temperature of the optical module and how to solve it. Generally speaking, a brand-new optical module will not have any major problems during short-term use.     The optical module is a relatively sensitive optical device. When the operating temperature of the optical module is too high, it will cause problems s...

• October 19. 2021

The Fibre Channel switch originated from the Fibre Channel protocol. On the fourth layer of the Fibre Channel protocol, the Fibre Channel-based SCSI protocol for storage, the IP protocol for the network, and the virtual interface (VI) protocol for clusters mapped to the network architecture are established. Fibre Channel switches provide Fibre Channel switching for high-bandwidth and low-latency d...

• October 16. 2021

SAN refers to the regional storage network, which needs to be connected by optical fiber, and the operation mode of the SAN mainly depends on the hardware. The structure of the SAN allows any server to connect to any storage array so that the server can directly access the data it needs no matter where it is located. Due to the optical fiber interface, the SAN also has a higher bandwidth. The SAN ...

• October 12. 2021

The Internet cafe network system needs to have a high bandwidth and support a large amount of data transmission. Therefore, Internet cafes have higher requirements for network hardware. When designing the Internet cafe network, it is necessary to ensure a high-quality network transmission speed, and also consider future network upgrades and maintenance. Next, ETU-LINK will introduce network equipm...

• October 09. 2021

Optical modules are core photoelectric conversion components in fiber-optic communication, data centers, enterprise networks, and telecom transmission systems. Correctly distinguishing single-mode and multi-mode optical modules is critical for matching fiber patch cords, ensuring transmission stability, and avoiding network failures. This article shares 4 practical identification methods compliant...

• September 30. 2021

In this article, ETU-LINK will introduce the application of optical modules in the data center computer room. As we all know, the construction of the data center computer room is a system project. It consists of the following parts: the host room (including network switches, server group, storage, data input, output wiring, communication area and network monitoring terminal, etc.), basic work...