• September 21. 2019

Many things are from scratch, from incomplete to complete development process, optical communication is also a technology realization from theory to engineering field, and to today's realization of high-speed operation of optical fibers. After decades of constant experiments by scientists to achieve today's achievements, never give up its research. Today, with the vigorous development of optical c...

• March 07. 2019

With the development of the networks, upgrading the 10G to 40G networks is the requirement of networks, But there is a very largest problem to build the cable system when upgrading, especially the short distance transmission of 40G. So in order to solve this problem, 40G QSFP+ SR4 BIDI modules produced by engineers... And today, we will introduce this to you , and hope it can be helpful ...

• January 29. 2019

Nowadays, 40G network has gradually developed into a backbone network for long-distance network transmission applications. It is widely used in 40G short distance network transmission. Because 40G network wiring is more difficult than 10G, need more patch cords and space. To know how it works is very important. Today here we will introduce some high density QSFP+ SR4 optical module wiring methods....

• August 24. 2018

As we all know, the 40G SR4 QSFP+ optical module is the ideal solution for short-range interconnection in 40G networks and has many advantages, but the 40G QSFP+ AOC also has similar function of optical module and is not inferior to the 40G SR4 QSFP+ module or even can replace it to transmit signals. Since both can be 40G short-distance interconnection, then what are the differences between them? ...

• September 21. 2018

100G has a variety of packaging forms, including CFP/CFP2/CFP4, CXP and QSFP28. Among these different 100G packaging forms, QSFP28 optical module has the advantages of high port density, low power consumption and low cost, so it has become the main packaging form of 100G network. Therefore, we will focus on four types of 100G QSFP28 optical modules today. 1.100GBASE-SR4 QSFP28 optical transce...

• August 08. 2018

Today let's learn about the MPO Patch cord. Last time one of our customer bought 100G SR4 MPO 100M, compatible with Juniper QFX5110 Switch.   1.How to connect the 2 transceivers in 2 switches with a patch cord directly? It's a question for him. So I gave him a solution, like the following picture shows. ①we imagine you use Juniper QFX5110-32Q to test the modules. ②100G SR4 MPO ...

• July 19. 2018

QSFP+ have Single-mode and multimode, it means QSFP+ optical module works on different types of fiber optic, the single-mode QSFP + use with single mode fiber, and the multimode QSFP + used with multimode fiber. Then what are the differences between them? Where are they applied? What should we pay attention to when we use them? In this article, we will discuss this topic. Optical module difference...

• July 17. 2018

With the development of the networks, upgrading the 10G to 40G networks is the requirement of networks, But there is a very largest problem to build the cable system when upgrading, especially the short distance transmission of 40G. So in order to solve this problem, 40G QSFP+ SR4 BIDI modules produced by engineers... And today, we will introduce this to you , and hope it can be helpful ...