• June 25. 2023

With the continuous surge of traffic, major operators and data centers began to upgrade the network architecture economically, smoothly and reliably. At present, there are two 100G migration paths, namely 10G to 40G to 100G and 25G to 100G. Next, ETU-LINK will introduce the wiring schemes of these two paths.   1. 10G wiring The 10 Gigabit Ethernet technology defi...

• April 15. 2023

Juniper EX4650 Ethernet switch provides Layer 2 and Layer 3 connectivity of 2 Tbps to networked devices such as security routers, servers, and other switches. The EX4650 is equipped with 48 line speed 10GbE/25GbE small pluggable optical module (SFP/SFP+/SFP28) ports and 8 line speed 40GbE/100GbE quad core SFP+optical module (QSFP+/QSFP28) ports in a compact 1U platform, providing flexible support ...

• April 04. 2023

In 1.25G and 10G optical modules, BiDi single-fiber and dual-fiber optical modules are transmitted by single-mode jumpers. Today, ETU-LINK will introduce a 100G BiDi single-fiber bidirectional optical module transmitted by multi-mode optical fibers. It adopts double LC fiber interface, uses multi-mode fiber for transmission up to 150 meters, working wavelength is 850nm, 950nm, modulation technolog...

• March 24. 2023

At present, high-speed optical fiber transmission has been widely used in various backbone networks, and Ethernet Passive Optical Network (EPON) has become the preferred solution of relevant operators because of its low cost and time-sharing ability to provide users with high-performance access. With the accelerated deployment of 1Gbps fiber-to-the-home technology in the access network, telecom op...

• March 18. 2023

ETU-LINK will introduce to you what is 10G SFP+ DWDM optical module and its advantages.   The traditional optical fiber communication system is transmits one optical signal in one optical fiber. This method actually only uses a part of the optical fiber bandwidth. In order to make full use of the huge bandwidth resources of the optical fiber and increase the transmission capacity of the ...

• March 08. 2023

At present, data center traffic is increasing exponentially and network bandwidth is also being upgraded, which brings great development opportunities for high-speed optical modules. ETU-link will talk about the four requirements for optical modules in the next generation data center. 1. High speed, improve bandwidth capability The switching capacity of switching chips almost doubles eve...

• March 04. 2023

In this blog, ETU-LINK will talk about 10G DWDM Tunable module and its differences from ordinary DWDM optical module. The wavelength of 10G conventional SFP+ DWDM optical module is fixed, while 10G SFP+ DWDM Tunable optical module can be configured to output different DWDM wavelengths. The wavelength tunable optical module has the characteristics of flexible...

• February 28. 2023

Many partners do not know much about the packaging types of optical modules, so in this article, ETU-LINK introduces you to what are the common packaging types of optical modules, right? 1. SFP SFP is known as small form-factor Pluggable, which defines the standard to be followed from 1Gb/s to 28Gb/s single channel SFP package, SFP module compresses the size and power consumption of optical module...