• June 24. 2016

As we learned, a common SFP transceiver is generally with two ports, one is TX port to transmit the signal, and the other one is RX port to receive signals. BiDi SFP transceiver is only with one port which uses an integral WDM coupler to transmit and receive signals over a single strand fiber. SFP and BiDi SFP Connection Methods All SFP transceivers must be used by pairs. For common SFPs...

• September 11. 2017

When install a Optical fiber optic network, people may make some common mistakes, which were usually overlooked. In this blog, we will list the most common ones. Hope to give you some guidance for your optical network installation. 1.SFP BIDI transceiver must be used in pair The SFP BiDi transceiver must be matched correctly. Take an example: The paired BIDI transceivers connect with switch A and ...

• November 09. 2021

In this blog, ETU-LINK will focus on introducing the type and transmission distance of the Gigabit single-mode SFP BIDI SC connector optical module. This series of optical modules can not only support 2km, 3km, 10km, 20km, 40km, 60km, 80km, 120km transmission distances, but also have commercial (0℃-70℃) and industrial  (-40℃-85℃) optional temperature ranges. In order to facilit...