• November 03. 2021

Cisco 550X series switches are mainly used for the establishment of 10G network for small and medium-sized enterprises. ETU-Link will introduce the optical module solution of Cisco 550X series switches.   Cisco 550X is configured with Ethernet SFP+ slot, which can support 10 Gigabit and Gigabit network transmission rates. The SFP+ slot can select the optical module with the corresponding...

• September 30. 2021

In this article, ETU-LINK will introduce the application of optical modules in the data center computer room. As we all know, the construction of the data center computer room is a system project. It consists of the following parts: the host room (including network switches, server group, storage, data input, output wiring, communication area and network monitoring terminal, etc.), basic work...

• September 14. 2021

In this article, ETU-LINK will introduce to you, what is the difference between active optical cable(AOC) and direct attach cable(DAC)? First, the AOC is composed of integrated optoelectronic devices. The signal transmission process is that the A terminal module converts the electrical signal into an optical signal, the optical signal is transmitted to the B terminal module by an optical fiber pat...

• August 10. 2021

With the advent of 40G Ethernet, many enterprise users have begun to take full advantage of current 10G network equipment to upgrade to 40G networks. In other words, this involves the use of 40G switches with QSFP+ ports and existing 10G devices (switches and servers) with SFP+ ports. In this article, ETU-LINK will share three common solutions and teach you how to interconnect the switch 40G QSFP+...

• July 23. 2021

In this article, ETU-LINK will take you to talk about network management switches and non network management switches. With the development of the network, the demand for switches is also increasing. Many switch parameters will be written with network management switches or non network management switches. What is the difference between the two?   The non network management switch is also kno...

• July 21. 2021

As we all know, DAC active cable is mainly used for interconnection between cabinets. Due to the limitation of passive copper cable DAC transmission distance due to material, high frequency loss of connector and other factors, the maximum length of passive copper cable DAC with transmission rate of 10G/25G can only reach 7m, and the maximum length of passive copper cable DAC with transmission rate...

• July 06. 2021

High speed cable and active optical cable are commonly used short-distance interconnection products in data center and enterprise computer room, but they have their own advantages and disadvantages. In this article, ETU-LINK will show you how to choose high-speed cable and active optical cable in data center computer room and how to compare their advantages?   First of all, let's ta...

• July 03. 2021

Today, ETU-LINK will introduce the connection scheme of Huawei 10 megabyte switch and 10 megabyte network card. First, we will understand the port type and optical port type of the ten megabyte network card equipped by Huawei wantrillion switch. Huawei's 10 megabyte access network switch is equipped with down line 10G SFP+ port, which is mainly connected to the access of the ten thousand megabyte ...