• November 01. 2022

As networks grow in size, we are seeing a shift from the traditional three-layer network architecture to a flatter, wider Spine-Leaf architecture. Most modern e-commerce, social media and cloud applications use distributed computing to serve their customers.  Distributed computing means that servers speak to servers and work in parallel to create dynamic web pages and answer customer question...

• October 29. 2022

This blog ETU -LINK will take you to read what is WDM, before that we first to get to know why the WDM technology, it appears from the background of the Internet, development rapidly in a short few decades, so operators urgently needs a lot of network capacity to meet growing customer service requirements.   For network expansion, simply increase the transmission capacity linearly by increasi...

• October 25. 2022

It is believed that everyone should be very familiar with the packaging of optical modules after reading the previous articles of ETU-LINK. So how much do you know about the packaging of optical components in optical modules? In this article, ETU-LINK will take you to understand the packaging process of optical devices.   At present, the common optical device packages include Box, COB, TO-CAN...

• October 24. 2022

In this blog, ETU-LINK will talk about the 50G SFP56 SR optical module using PAM4 modulation technology. Since the PAM4 signal has four level values, the PAM4 signal can be used in the same physical bandwidth of the channel. Downlink transmission is twice the amount of information compared to NRZ signals, enabling single-channel 50G applications. Therefore, PAM4 signal modulation has become t...

• September 22. 2022

As data centers and telecom operators require higher transmission rates for optical modules, what technologies do optical module manufacturers use to achieve higher transmission rates? This article ETU-LINK will reveal the answer for you. 1. Increase the baud rate. The baud rate refers to the modulation rate of the data signal to the carrier. This method is mostly used for low rate optical modules...

• September 09. 2022

Cisco catalyst ® 9400 series switches are Cisco's main modular enterprise exchange access, distribution and core platform for security, Internet of things and cloud. This series of switches is the basic component of Cisco's leading enterprise architecture sd-access. The platform adopts a chassis architecture that supports up to 9 TBPs system bandwidth, and has a powerful po...

• August 25. 2022

What is OM5 fiber patch cord? Where can it be used? As we know that OM3 and OM4 multimode fibers are mainly used to connect optical modules in the 850nm band. However, with the continuous improvement of the transmission rate of optical modules, since the parallel transmission technology uses multiple single-channel parallel transmissions, more dense fiber cabling is required, management and mainte...

• August 16. 2022

With the continuous surge in data center traffic, the market demand for 100G optical modules is also further increasing. Common 100G optical modules include SR4, LR4, ER4, etc. However, in practical applications, due to the length of the optical fiber link. Several types of optical modules alone cannot meet the most cost-effective optical network transmission solutions in data centers. Therefore, ...