• June 28. 2019

10GBASE-T SFP+ Copper RJ45 module also known as optical port switching electrical port module, photoelectric conversion module, it is a hot-plugging module, adopts SFP+ packaging form, RJ45 connector, transmission rate is 10G, the transmission distance can reach 30m, its port supports shielded twisted pair, and can support unshielded twisted pair. The 10GBASE-T SFP+ Copper RJ45 module complies wit...

• June 17. 2019

This article gives you two main points, about the X2 to 10G SFP+ optical module connection solution and the X2 module and SFP+ module direct connection solution. Now let's take a look at the following solution with ETU-Link: The X2 to 10G SFP+ optical module connection solution Required equipment: ①X2 optical module ②X2 to SFP+ converter ③10G SFP+ optical module ④patch cord Solution 1 One end uses...

• January 31. 2019

Those days, so many customers asked us about the Copper-T RJ45 modules, Some asked for the goods, some need the problem supports. Now let us share some with you , hope it can be helpful for you to enhance you market. 1. Which Copper-T can have in the market ? For the Copper-T RJ45 types, pls check : No. Types 1 10/100M SFP Copper-T RJ45 100m 2 10/100/1000M SFP Copper-...

• December 13. 2018

In 40G/100G data center cabling, many engineers ask: How to connect MPO optical module to LC optical module? How to connect 40G QSFP+ (MPO) to 10G SFP+ (LC)? What cables and panels are needed? At present, there are usually two types of optical modules in the market: MPO and LC. For two optical modules with the same interface, MPO patch cord or LC patch cord can basically realize the connection bet...

• October 24. 2018

BIDI optical module only has one optical port, just need one fiber can simultaneously transmit and receive optical signals, is a solution to save fiber resources. BIDI optical module uses WDM technology to realize the bidirectional transmission of optical signals on one optical fiber. Optical module usually has two ports, the TX is the transmitting port, and the RX is the receiving port. BIDI modu...

• September 17. 2018

If you are the first time to buy optical transceivers, you might be confused with "DDM", "DOM" or "RGD". What are they? Today, ETU-Link will describe in detail the functions of these three types of optical modules. What is DDM? DDM means Digital Diagnostic Monitoring. It is the technique used in the optical module so that users can monitor the real-time parameters of the module. Including modules’...

• August 31. 2018

Direct attach cable is a communication equipment connection cable. It is commonly used to realize short distance high-speed interconnected communication. It is mainly used to realize the interconnection between servers, switches, memory and other devices. It is a low-cost high speed data communication solution. The common wire specifications are 24AWG, 28AWG and 30AWG, which can meet a variety of ...

• August 29. 2018

BIDI optical module only has one optical port, just need one fiber can simultaneously transmit and receive optical signals, is a solution to save fiber resources. BIDI optical module uses WDM technology to realize the bidirectional transmission of optical signals on one optical fiber. Optical module usually has two ports, the TX is the transmitting port, and the RX is the receiving port. BIDI modu...