• January 11. 2023

Due to new applications such as 4K high-definition video, live broadcast and VR have promoted the rapid growth of global network traffic, and new applications such as cloud computing, laaS services and big data have higher requirements for data transmission in data centers, global data centers have been upgraded from the original 10G/40G to 25G/100G, which has triggered an increase in the demand f...

• December 24. 2022

The traditional computing network of data centers is composed of the access layer, the convergence layer and the core layer. However, with the rapid growth of new applications and the amount of data, the requirements on the network architecture are constantly raised. Therefore, a new network topology architecture -- leaf-spine structure is born in the data center. Now, ETU-LINK will introduce the ...

• December 09. 2022

Common 40G QSFP+ multi-mode optical modules include SR4 and BIDI, so what is the difference between the two multi-mode optical modules? And how to choose it? ETU-LINK will introduce these two optical modules to you. The package type of QSFP-40G-SR4 is QSFP+, the interface type is MPO, the transmission distance can reach up to 100 meters when used with OM3 patch cords; and the transmission distance...

• December 07. 2022

In recent years, with the rapid development of the Internet, cloud computing and big data, the increasingly high demand for bandwidth has promoted the construction of IT infrastructure data centers. The current speed standard of 10G Ethernet cannot meet the rapid growth of network traffic demands of large and medium-sized enterprises. From the perspective of resource investment and cost, 25G is th...

• November 08. 2022

Usually, the ports of the newly purchased optical modules are clean, and there is no need to clean the ports, but for the optical modules that are idle or have not been inserted into the dust cap in time, when they are used again, in order to prevent the transmission performance from being affected, we still have It is necessary to clean the port of the optical module first. Then the following ETU...

• November 01. 2022

As networks grow in size, we are seeing a shift from the traditional three-layer network architecture to a flatter, wider Spine-Leaf architecture. Most modern e-commerce, social media and cloud applications use distributed computing to serve their customers.  Distributed computing means that servers speak to servers and work in parallel to create dynamic web pages and answer customer question...

• October 25. 2022

It is believed that everyone should be very familiar with the packaging of optical modules after reading the previous articles of ETU-LINK. So how much do you know about the packaging of optical components in optical modules? In this article, ETU-LINK will take you to understand the packaging process of optical devices.   At present, the common optical device packages include Box, COB, TO-CAN...

• September 22. 2022

As data centers and telecom operators require higher transmission rates for optical modules, what technologies do optical module manufacturers use to achieve higher transmission rates? This article ETU-LINK will reveal the answer for you. 1. Increase the baud rate. The baud rate refers to the modulation rate of the data signal to the carrier. This method is mostly used for low rate optical modules...