Optical Transceiver
Search
Home Search

  • Can different brands of switches be interconnected?
    Can different brands of switches be interconnected?
    • December 31. 2020

    Usually, there are thousands of switches in a large data center. When connecting switches, sometimes different brands of switches are connected. So, can different brands of switches and optical modules be interconnected? The answer is yes, but you need to meet the following conditions to interconnect. 1. The specifications and parameters of optical modules of switches on both sides must be consist...

  • Requirements of optical module in the development trend of cloud data center
    Requirements of optical module in the development trend of cloud data center
    • December 29. 2020

    In recent years, the traffic and bandwidth of the data center are growing exponentially, and the data center is also gradually transiting from 10G and 40G to 100G network, which drives the application of 100G optical modules in the data center. As a photoelectric converter, optical module is a very important part of optical fiber communication. Because optical fiber communication has the character...

  • The energy saving and power saving scheme of data center computer room
    The energy saving and power saving scheme of data center computer room
    • December 19. 2020

    Data center computer room plays an important role in enterprise data processing and storage, but it is also accompanied by high energy consumption. Among them, the power consumption of network equipment such as switches accounts for 40% - 70% of the total power consumption. In addition, the power consumption of cooling and lighting equipment in the computer room makes up a very high proportion of ...

  • Application of 50G optical module in 5G
    Application of 50G optical module in 5G
    • December 15. 2020

    At present, 5G has started the commercialization process, but the complex bearer scheme leads to the increase of the corresponding optical module types. For 5G forward transmission, in terms of speed, AAU has introduced the eCPRI protocol standard, and the forward 25G rate has become the standard of various equipment manufacturers. Because of this, the rate standard of the carrier network will be ...

  • 40G data center commonly used optical module
    40G data center commonly used optical module
    • November 13. 2020

    40G network has been widely used in data center, and optical module is one of the essential components of data center equipment interconnection. Next ETU-LINK will introduce the types of 40G QSFP+ optical modules to you. 40GBASE-SR4 optical module: It uses MPO connector with working wavelength of 850nm. The transmission distance can reach 100m when used with OM3 multimode fiber; and can reach 150m...

  • Introduction and application of 100G QSFP28 PSM4 optical module
    Introduction and application of 100G QSFP28 PSM4 optical module
    • October 30. 2020

    The growth of network bandwidth demand promotes the development of data transmission rate. Now 40G speed obviously can not meet the needs of data transmission, so 100G was born under this background. In the 100G short distance transmission scheme (500m-2km), the 100G QSFP28 PSM4 optical module is a more cost-effective solution for 100G data center. Next, ETU-LINK will introduce what is the 100G QS...

  • Optical module direct connection solution of Huawei S12700 series switch
    Optical module direct connection solution of Huawei S12700 series switch
    • September 12. 2020

    Huawei S12700 is an agile switch designed and developed for the core of next generation campus network. It adopts fully programmable architecture to meet business requirements flexibly and quickly. S12700 provides high-performance L2 / L3 switching service, and built-in high-capacity WLAN AC controller to realize the in-depth integration of wired and wireless services, breaking through the capacit...

  • Introduction and application of 25G DAC passive copper cable
    Introduction and application of 25G DAC passive copper cable
    • September 04. 2020

    The 25G direct attach cable is composed of a copper cable and a transceiver module at both ends. It adopts silver plated conductor and foam insulated core wire. It has excellent attenuation performance and low delay performance, which makes the signal transmission correct and can also improve the transmission speed. It is a short-distance connection solution that replaces optical modules. The conn...

© Copyright: 2026 ETU-Link Technology CO ., LTD All Rights Reserved.

IPv6 network supported

Friendly Links:

易天官网
top

Get a Quote/Datasheet

Get a Quote/Datasheet

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #