• September 11. 2019

Fiber patch cords is an essential connection line in fiber wiring, in the purchase of fiber patch cord, we always see PC/APC/UPC words, such as LC/UPC, FC/UPC, SC/APC or ST/PC patch cord and so on, so you know what PC/APC/UPC represents? Is the SFP optical module compatible with PC/APC/UPC fiber patch cord?Through the detailed introduction of this article, I believe you will find the answer. PC/AP...

• April 19. 2019

With the rapid development of cloud computing and data centers, 40G high-speed network cabling has become the mainstream of enterprise and data center interconnection. Traditional 2-core fiber connections can no longer meet high-density wiring requirements. This article focuses on the performance, advantages, disadvantages, and application scenarios of 12‑core and 8‑core MPO connections, helping y...

• March 07. 2019

With the development of the networks, upgrading the 10G to 40G networks is the requirement of networks, But there is a very largest problem to build the cable system when upgrading, especially the short distance transmission of 40G. So in order to solve this problem, 40G QSFP+ SR4 BIDI modules produced by engineers... And today, we will introduce this to you , and hope it can be helpful ...

• January 15. 2019

SFP Media Converter is commonly used for copper networks that cannot be covered, must use fiber to extend the transmission distance. Media converter (fiber optical converter) is widely used in security monitoring, enterprise network, intelligent building, and industrial communication to extend network transmission distance via optical fiber. However, users often encounter problems like link down, ...

• January 03. 2019

Both optical patch cord and optical transceiver have single mode / multimode. If the collocation is wrong when using, it will lead to the parameter error of the optical modules. How to match the use of patch cord and optical transceiver? Today, we will share the knowledge with you, hope that can will be helpful for you! What are the differences between single mode and multimode optical modules? Th...

• December 13. 2018

In 40G/100G data center cabling, many engineers ask: How to connect MPO optical module to LC optical module? How to connect 40G QSFP+ (MPO) to 10G SFP+ (LC)? What cables and panels are needed? At present, there are usually two types of optical modules in the market: MPO and LC. For two optical modules with the same interface, MPO patch cord or LC patch cord can basically realize the connection bet...

• August 08. 2018

Today let's learn about the MPO Patch cord. Last time one of our customer bought 100G SR4 MPO 100M, compatible with Juniper QFX5110 Switch.   1.How to connect the 2 transceivers in 2 switches with a patch cord directly? It's a question for him. So I gave him a solution, like the following picture shows. ①we imagine you use Juniper QFX5110-32Q to test the modules. ②100G SR4 MPO ...

• July 17. 2018

With the development of the networks, upgrading the 10G to 40G networks is the requirement of networks, But there is a very largest problem to build the cable system when upgrading, especially the short distance transmission of 40G. So in order to solve this problem, 40G QSFP+ SR4 BIDI modules produced by engineers... And today, we will introduce this to you , and hope it can be helpful ...