• January 10. 2019

In order to reduce the possibilities of the line malfunction for the data center, avoid the unnecessary optical damage, cleaning is very important for the optical fiber. And in fact, optical fiber cleaning not only include cleaning the optical fiber, but also for the optical connector, such as the modules' connector. Today we want show some of the modules cleaning knowledge. 1. Pollution Source fo...

• December 20. 2018

25G SFP28 optical module is a module with a transmission rate of 25Gbps. The appearance of 25G optical module makes up for the defects of high speed optical module such as high price and excessive power consumption, while the speed of 10G optical module cannot meet meet the user's requirements.What are the common 25G SFP28 optical modules on the market? The following ETU-Link will give you a detai...

• December 13. 2018

In 40G/100G data center cabling, many engineers ask: How to connect MPO optical module to LC optical module? How to connect 40G QSFP+ (MPO) to 10G SFP+ (LC)? What cables and panels are needed? At present, there are usually two types of optical modules in the market: MPO and LC. For two optical modules with the same interface, MPO patch cord or LC patch cord can basically realize the connection bet...

• December 10. 2018

Optical modules are an integral part of all network connectivity deployments. As a sales of optical transceiver should know that the working temperature will influence the parameters of the optical transceiver. When the applied environment temperature of the module is changed, then the working current will change as the temperature changes. At the same time, it will lead to changes in the paramete...

• December 05. 2018

There are many types of SFP optical modules, 155M, 622M, 1.25G and 2.5G SFP, 155M SFP we also call it 100Megabit SFP. So what is 100Megabit SFP optical module? Today we will give you the answer. 100Megabit SFP optical modules are small form factor pluggable (SFP) transceivers based on the SFP Multi-Source Agreement (MSA). 100Megabit SFP optical modules can work together with the optical fiber to p...

• November 30. 2018

Nowadays, the most common use of mobile communication networks is 4G networks in China. With the maturity of 5G technologies, it is believed that 5G networks (fifth generation mobile communication technologies) will become a hot spot in the field of information and communication in the next five years. The construction and upgrade of Bearer network will continue to increase the demand for optical ...

• October 16. 2018

When 10G network can not meet the increasing demand of the network, 40G network is more and more popular. With the continuous development, 40G Ethernet deployment has been accepted by more and more users. So do you know what factors should be considered when deploying 40G Ethernet? ETU-Link will solve the doubts for everyone！ Compared with the deployment of 10G networks, 40G is a bit more complex ...

• December 30. 2019

SFP optical transceivers are widely used in fiber switches, Gigabit Ethernet, SAN storage, 5G fronthaul, and data center interconnection. Optical signal intensity (Tx power / Rx power) is the most critical indicator for link stability and fault location. This article explains how to check, measure, and interpret SFP signal strength with industry standards and switch command examples. As we all kno...