Optical Transceiver
Optical Fiber Introduction
Home Optical Fiber Introduction

Optical Fiber Introduction

  • Sharing of fixed optical attenuator
    Sharing of fixed optical attenuator
    • December 22. 2016

    Optical attenuator is the optical device for reducing optical signal power. Depending on the application, the optical attenuator can be divided into adjustable optical attenuator and fixed optical attenuator. Today we will introduce the basics of fixed optical attenuators. The attenuation power of fixed optical attenuator is fixed(1 dB, 5 dB, 10 dB etc). The attenuation power of fixed optical atte...

  • Optical Fiber Inspection Instruction
    Optical Fiber Inspection Instruction
    • December 07. 2016

    Optical connectors are common throughout the network and give us the power to add, drop, move and change the network. However, it is an undeniable fact that the end face pollution of optical connectors is a major cause of the failure of the network. Today we will introduce the fiber end surface inspection. About end face pollution Like picture 1, the end face of the optical fiber or connector shal...

  • How to use fast connectors?
    How to use fast connectors?
    • December 05. 2016

    The wide application of the fiber to the home (FTTH) promotes the rise of the optic connector. This product has the characteristics of small size and fast connection, and caused small loss, high stability, it’s essential fiber connection devices for fiber system. Today will introduce the use instruction of fiber fast connector. About fiber fast connector Fiber fast connector is a kind of innovativ...

  • Do you know how to manage the patch cord?
    Do you know how to manage the patch cord?
    • November 29. 2016

    With the wide application of 40G/100G network, the installation and management of patch cord becomes more and more important, the management directly affects the overall data transmission. Good management can not only reduce the operating costs, but also can increase the network operation and maintenance reliability and flexibility. Here, we will introduce 5 methods to improve patch cords’ managem...

  • What are the differences between the SM and MM optical fiber?
    What are the differences between the SM and MM optical fiber?
    • December 30. 2019

    Optical fiber is the flexible transparent fiber made from silica or plastics, slightly thicker than the human hair. Optical fiber is one of the most common tools of transmitting light at both ends, and widely used in optical fiber communication. Optical fiber is usually composed of a transparent core with low refractive index and a transparent cladding material. Generally speaking, there are two k...

  • Multimode fiber design——OM1,OM2,OM3,OM4
    Multimode fiber design——OM1,OM2,OM3,OM4
    • October 19. 2016

    From the backbone, the metropolitan area network, access network to the local area network, the distance demand of the optical fiber is shorter and shorter. The good or bad performance of fiber optic is no longer important, because the distance is short, can be accepted. But the low cost of the light source is more and more attention, LED,VCSEL is much cheaper than FP, DFB and EDFA. The first gene...

  • Difference between plastic optical fiber and quartz optical fiber
    Difference between plastic optical fiber and quartz optical fiber
    • October 11. 2016

    The new week of October has begun and only work will never be finished. Today one customer asked, do you provide plastic optical fiber? Answer is no. As a professional sales person, even without the product, should also understand and learn it. Today we will share the knowledge with you! Quartz fiber (silicon dioxide) is widely used in optical fiber communication: The blue column represents the si...

  • What should pay attention to when using optical patch cord?
    What should pay attention to when using optical patch cord?
    • September 28. 2016

    Optical Patch Cord is widely used nowadays, the patch cord is a weak link in the network optical fiber infrastructure. So in order to achieve the best performance and reliability, we must follow the correct procedures in the optical patch cord managing center. Following list some problems which should be noticed during using the optical patch cord: ※ The wavelength of optical module on both ends o...

  • Optical patch cord and pigtail, do you choose the right one?
    Optical patch cord and pigtail, do you choose the right one?
    • September 08. 2016

    Optical pigtail and patch cord are the most conventional and used network connecting products. They have many common features, but still having some differences in many ways. Understanding the similarities and differences between them will help you decide the best choice for your project application. Here we will talk about their similarities and differences through the structures. Structure compa...

  • How to connect the multimode optical patch cord?
    How to connect the multimode optical patch cord?
    • September 01. 2016

    How to correctly connect the multimode optical patch cord? How to select the type of multimode optical patch cord? Today we will discuss these two questions. What is multimode optical patch cord? It is used as the patch cord from device to optical fiber wiring link, it has thicker protective layer, generally used to connect the transmitter and terminal box. The main type of multimode optical patch...

    A total of

    7

    pages

© Copyright: 2026 ETU-Link Technology CO ., LTD All Rights Reserved.

IPv6 network supported

Friendly Links:

易天官网
top

Get a Quote/Datasheet

Get a Quote/Datasheet

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #